Kendari Media

Analyze laptop damage requires foresight and patience. Do not rush to decide before doing check the overall condition of your laptop. The following are some common laptop problems:

Dead or Power Failure

For die case you need to check first is your laptop batery. The possibility of your laptop batery runs total. Try doing the charging and wait about half an hour. Another cause is that laptop adapter not working. You can check the indicator light illuminates when carger in laptop adapter laptop in love. If the indicator light does not light, there is the possibility of a faulty adapter or power connector board boardyang broken or damaged laptop. Another possibility laptop totally dead board, causing the total dead laptop at all.

Power lights flash but the LCD screen does not display the image.

Please check with attach an external monitor to the VGA port on your laptop. Then turn on your laptop, if the laptop is still dead, the possibility of damage is VGA, the CPU, mainboard, the BIOS IC, or RAM is dirty or damaged. Try to do check one by one.

And if an external monitor and perform live with normal images, the possibility of damage is on the LCD inverter, LCD flexible cable, or LCD monitor. If there is damage on the LCD screen, then you have to replace the LCD screen, because the LCD screen can not be repaired.

Laptop Cooling Problems

A common problem faced by users of the laptop is a hot issue, however, the heat is the main enemy of the laptop, the laptop nearly 75% of damage caused by excessive heat. Especially in the laptop casing hardly any empty spaces are all filled with components. A recurring problem in this section is clogged sewer heat on the heatsink as it is covered by dust. This causes the heat that would otherwise be issued re-entry into the laptop. As a result, the temperature inside the laptop up from the seharusanya allowed. This can cause over heating on chip VGA, Processor, and other components of the laptop mainboard.

Problems Port and Power Connectors

This problem also occurs frequently. This is caused by the breakdown of the existing solder on the connectors or ports. Solder cracking caused by heat and the age of the laptop itself. The solution is to re-solder the parts that have cracks solder.

Good work!